|
- When using the IBM 3151 terminal for operation with either CCI
Concurrent DOS or Novell DR Multiuser DOS, the following settings
are recommended. To enter the SETUP mode on a IBM 3151 terminal,
press CTRL-SETUP. Options which differ from the factory settings
are underlined .
- NOTE: A "?" as a field value means no preference.
- GENERAL
- Machine Mode = 925PC
- Screen = Normal
Row and Column = 25 x 80
- Enhance Mode = ON
- Scroll = Jump
- Attribute = CHAR
- Auto LF = OFF
- Attribute Character = HIDDEN
CRT
- Saver = ?
- Line Wrap = OFF
- Alarm Volume Level = 1
- Message Type = NON-DISPLAY
- Cursor = BLINK-BAR
- COMMUNICATION
- Operating Mode = ECHO
- Interface = RS-232C
- Line Speed = 38400
- Line Control = IPRTS
- Word Length (bits) = 8
- Break Signal (ms) = 500
- Parity = NO
- Stop Bit = 1
- Pacing = DTR
- Parity Check = OFF
- KEYBOARD
- Generated Code Set = SCAN
PRINTER
- Line Speed (bps) = 9600
- Word Length (bits) = 8
- Parity = NO
- Stop Bit = 1
- Characters = NATIONAL
- DTR Pacing = OFF
NOTE: Certain models of this terminal may require an
emulation cartridge to run in under either CCI
Concurrent DOS or DR Mutliuser DOS. If the setup of the
terminal does not match this document, please contact
the Technical Support department for assistance.
|
|
